How can you use a hunting camera is sold for hunters who are “not” or around a place, it is a type of camera remotely. It can be placed by the user in the areas where you want access to images taken at your remote location (place and time when the user is not there).
1.Use belt allows it to be suspended from a shaft (for example). Lock the supplied strap to reduce the loss of the aircraft, preventing theft.
(1) is a con Ue robust and waterproof for prolonged outdoor use.
(2) Take pictures of each “stamped” (with the date and time it was recorded).
2.Use the camera images game animals. It is sold for hunters, for example, to record and to see deer, moose or bear, etc that were in a clearing, pasture or animal / game trail.Use these unmanned cameras enabled the movement to game site – useful for “testing pre-season,” find good hunting sites, based on images from the camera. Record images, either as a photograph or video.
3.Use works day and / or night by motion detection to about 45 feet.
4.Use information as a hunter best tree deer blind or support, for example: In limited areas of display spaces (like bushes) where a person can not remain .
5. take pictures of more than one camera, the angles chosen automatically. Take pictures of the same time / location as you wish. Movies .
6.Choose or digital cameras. Digital photos instead of film, or
(1) film is developed, usually 35 mm – instead of
digital memory (2) use a laser beam of red light in a location update developed to take the photo
(3) The flash strobe (flash lamp) that reach 15 feet for nighttime images.
7.Get stealth, night view with infrared images (IR), sometimes available alone or in addition to strobe flash in the same production camera.Sound can send game calls or sounds to attract a variety animals, with intervals of adjustable probe 1 to 24 hours.
8.Decide on the way in which the camera will be set up, as regards the calendar as a new image may, perhaps, be taken each / every 30 seconds until the movement (or heat detection) events are detected. Some fighters gives the choice of parameters of normal and stealth LED flash (IR) flash.LED (IR) imager lets you play at night without visible flash flash. Thus, the flash will give the position of the camera to the other respecting the different hunting areas. Some models have a manual switch to configure an infrared imaging (filter) day or night mode.